|
|
HyCrack log splitter spare parts
 HC28101 Hardened Tip
 £65 (for all machines)
'Signed For' postage and packing £5.00
[Tip replacement instructions below]
HC28001 HC1X series Drive
Shaft
£125
HC28002 HC2X series Drive
Shaft
£175
HC28102 HC1X Screw Cone
(excl. Tip)
£185
HC28202 HC2X Screw Cone
(excl. Tip)
£295
HC2PTO1 HC1X PTO Shaft
(inc. Covers)
HC2PTO2 HC2X PTO Shaft
(inc. Covers)
|
HC28101 Hardened Tip |
|
HCPTOADAPT
PTO Adaptor
PTO Adaptor for Ferguson 1.1/8” PTO output to Hycrack PTO shaft
£24.75
1st Class postage and packing £7.50
This item supplied for TE20 Ferguson users (Grey Fergies): TEA20,
TED20, TEF20 TEH20 series.
Please email or
telephone for any of these items with requirements and
delivery postcode.
All prices plus carriage except Tip and PTO Adaptor as shown,
all plus VAT @ 20%
E&OE
|
 |
|
Replacing a worn Hycrack tip
The best
way to remove the old tip is to grind or file two flats on opposite sides of the
tip taking care not to damage the main cone. Then lock the main cone from
turning by partly inserting a rod, nail or small bolt into the hollow pin that
secures the cone to the shaft so that it touches the base plate. Using a
suitable spanner that will fit the flats you have ground, unscrew the tip, which
has a left hand thread, in a clockwise direction. A tap on the
spanner is sometimes necessary just to break the initial tightness. Once
loosened the tip will usually screw out by hand. Remove your cone locking
device!
Alternatively you may find that the tip simply unscrews on application of gentle
heat.
Using a
glove, screw in the sharp new tip anticlockwise up to it’s shoulder applying a
little ‘Copperslip’ or grease to the thread to assist in future removal. Do not
grip the new tip with metal tools as this may damage it. The first use of the
machine in a log will tighten the tip. Do this carefully if the tip is not
yet up to the shoulder otherwise you may snap it!
|
